10.1inch HDMI LCD - Problem bei Treiberinstallation

Heute ist Stammtischzeit:
Jeden Donnerstag 20:30 Uhr hier im Chat.
Wer Lust hat, kann sich gerne beteiligen. ;)
  • Hallo,

    ich habe mir das Display 10.1inch HDMI LCD zugelegt.
    Leider schlägt die Treiberinstallation, genauer gesagt das entpacken der Treiber des Displays fehl.
    Info http://www.waveshare.com/wiki/10.1inch_HDMI_LCD

    Führe ich die Installation über ./LCD101-1024x600-show aus, bekomme ich eine Kernel Panic :(
    Ich hänge hier fest, der Support des Herstellers ist hier leider aufgrund ausbleibender Antwort keine Hilfe.

    Anbei die Logs vom Entpackungsvorgang (also PI und sudo), vielleicht hat ja jemand einen Tip für mich.

    Gruß, Thorsten

    pi@raspberrypi:/boot $ tar xzvf /boot/LCD-show-161112.tar.gz
    LCD-show/
    LCD-show/etc/
    LCD-show/etc/X11/
    LCD-show/etc/X11/xorg.conf.d/
    LCD-show/etc/X11/xorg.conf.d/
    99-calibration.conf-35b
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-270
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-180
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-180
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-180
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-90
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-180
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-90
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-270
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-180
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-270
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-90
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-90
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-90
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-90
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-180
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-90
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-270
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-270
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-180
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-270
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-270
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-90
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-180
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-270
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35
    tar: LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/waveshare32b-overlay.dtb
    tar: LCD-show/etc/X11/xorg.conf.d: Funktion utime fehlgeschlagen: Die Operation ist nicht erlaubt
    tar: LCD-show/etc/X11: Funktion utime fehlgeschlagen: Die Operation ist nicht erlaubt
    tar: LCD-show/etc: Funktion utime fehlgeschlagen: Die Operation ist nicht erlaubt
    tar: LCD-show/waveshare32b-overlay.dtb: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD35-show
    tar: LCD-show/LCD35-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD7-1024x600-show
    tar: LCD-show/LCD7-1024x600-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/cmdline.txt
    tar: LCD-show/cmdline.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD43-show
    tar: LCD-show/LCD43-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/inittab
    tar: LCD-show/inittab: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/waveshare35a-overlay.dtb
    tar: LCD-show/waveshare35a-overlay.dtb: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/xinput-calibrator_0.7.5-1_armhf.deb
    tar: LCD-show/xinput-calibrator_0.7.5-1_armhf.deb: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD4-800x480-show
    tar: LCD-show/LCD4-800x480-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/
    LCD-show/boot/config-35b.txt-270
    tar: LCD-show/boot/config-35b.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-35b.txt
    tar: LCD-show/boot/config-35b.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-4-800x480.txt
    tar: LCD-show/boot/config-4-800x480.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-7-800x480.txt
    tar: LCD-show/boot/config-7-800x480.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-43.txt
    tar: LCD-show/boot/config-43.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-7-1024x600.txt-90
    tar: LCD-show/boot/config-7-1024x600.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-35b.txt-180
    tar: LCD-show/boot/config-35b.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-7-800x480.txt-90
    tar: LCD-show/boot/config-7-800x480.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-5.txt
    tar: LCD-show/boot/config-5.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/mark
    tar: LCD-show/boot/mark: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-35.txt-180
    tar: LCD-show/boot/config-35.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-35.txt
    tar: LCD-show/boot/config-35.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-32.txt-180
    tar: LCD-show/boot/config-32.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-101-1024x600.txt-90
    tar: LCD-show/boot/config-101-1024x600.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-4.txt-90
    tar: LCD-show/boot/config-4.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-4-800x480.txt-180
    tar: LCD-show/boot/config-4-800x480.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-7-800x480.txt-270
    tar: LCD-show/boot/config-7-800x480.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-5.txt-270
    tar: LCD-show/boot/config-5.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-101-1024x600.txt-270
    tar: LCD-show/boot/config-101-1024x600.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-4.txt-270
    tar: LCD-show/boot/config-4.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-4.txt-180
    tar: LCD-show/boot/config-4.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-7-800x480.txt-180
    tar: LCD-show/boot/config-7-800x480.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-43.txt-90
    tar: LCD-show/boot/config-43.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-5.txt-180
    tar: LCD-show/boot/config-5.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-35b.txt-90
    tar: LCD-show/boot/config-35b.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-35.txt-270
    tar: LCD-show/boot/config-35.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-5.txt-90
    tar: LCD-show/boot/config-5.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-4-800x480.txt-90
    tar: LCD-show/boot/config-4-800x480.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-nomal.txt
    tar: LCD-show/boot/config-nomal.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-32.txt
    tar: LCD-show/boot/config-32.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-35.txt-90
    tar: LCD-show/boot/config-35.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-32.txt-90
    tar: LCD-show/boot/config-32.txt-90: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-4-800x480.txt-270
    tar: LCD-show/boot/config-4-800x480.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-101-1024x600.txt-180
    tar: LCD-show/boot/config-101-1024x600.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-32.txt-270
    tar: LCD-show/boot/config-32.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-43.txt-180
    tar: LCD-show/boot/config-43.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-43.txt-270
    tar: LCD-show/boot/config-43.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-4.txt
    tar: LCD-show/boot/config-4.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-7-1024x600.txt
    tar: LCD-show/boot/config-7-1024x600.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-101-1024x600.txt
    tar: LCD-show/boot/config-101-1024x600.txt: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-7-1024x600.txt-180
    tar: LCD-show/boot/config-7-1024x600.txt-180: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/boot/config-7-1024x600.txt-270
    tar: LCD-show/boot/config-7-1024x600.txt-270: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/dtc.sh
    tar: LCD-show/boot: Funktion utime fehlgeschlagen: Die Operation ist nicht erlaubt
    tar: LCD-show/dtc.sh: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD32-show
    tar: LCD-show/LCD32-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD28-show
    tar: LCD-show/LCD28-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD4-show
    tar: LCD-show/LCD4-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/waveshare35b-overlay.dtb
    tar: LCD-show/waveshare35b-overlay.dtb: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/usr/
    LCD-show/usr/share/
    LCD-show/usr/share/X11/
    LCD-show/usr/share/X11/xorg.conf.d/
    LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI
    tar: LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf
    tar: LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD-hdmi
    tar: LCD-show/usr/share/X11/xorg.conf.d: Funktion utime fehlgeschlagen: Die Operation ist nicht erlaubt
    tar: LCD-show/usr/share/X11: Funktion utime fehlgeschlagen: Die Operation ist nicht erlaubt
    tar: LCD-show/usr/share: Funktion utime fehlgeschlagen: Die Operation ist nicht erlaubt
    tar: LCD-show/usr: Funktion utime fehlgeschlagen: Die Operation ist nicht erlaubt
    tar: LCD-show/LCD-hdmi: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/\r/
    tar: LCD-show/\r: Funktion mkdir fehlgeschlagen: Keine Berechtigung
    LCD-show/\r/99-calibration.conf-101-1024x600
    tar: LCD-show/\r: Funktion mkdir fehlgeschlagen: Keine Berechtigung
    tar: LCD-show/\r/99-calibration.conf-101-1024x600: Funktion open fehlgeschlagen: Datei oder Verzeichnis nicht gefunden
    LCD-show/LCD101-1024x600-show
    tar: LCD-show/LCD101-1024x600-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD35B-show
    tar: LCD-show/LCD35B-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD7-800x480-show
    tar: LCD-show/LCD7-800x480-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    LCD-show/LCD5-show
    tar: LCD-show/LCD5-show: Funktion open fehlgeschlagen: Die Datei existiert bereits
    tar: LCD-show: Funktion utime fehlgeschlagen: Die Operation ist nicht erlaubt
    tar: Beende mit Fehlerstatus aufgrund vorheriger Fehler
    pi@raspberrypi:/boot $


    pi@raspberrypi:/boot $ sudo tar xzvf /boot/LCD-show-161112.tar.gz
    LCD-show/
    LCD-show/etc/
    LCD-show/etc/X11/
    LCD-show/etc/X11/xorg.conf.d/
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-270
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-180
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-180
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-180
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-90
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-180
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-90
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-270
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-180
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-270
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-90
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-90
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-90
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-90
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-180
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-90
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-270
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-270
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-180
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-270
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-270
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-90
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-180
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-270
    LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35
    LCD-show/waveshare32b-overlay.dtb
    LCD-show/LCD35-show
    LCD-show/LCD7-1024x600-show
    LCD-show/cmdline.txt
    LCD-show/LCD43-show
    LCD-show/inittab
    LCD-show/waveshare35a-overlay.dtb
    LCD-show/xinput-calibrator_0.7.5-1_armhf.deb
    tar: LCD-show/xinput-calibrator_0.7.5-1_armhf.deb: Kann Datei-Eigentümer nicht zu uid 65534, gid 65534 ändern: Die Operation ist nicht erlaubt
    LCD-show/LCD4-800x480-show
    LCD-show/boot/
    LCD-show/boot/config-35b.txt-270
    LCD-show/boot/config-35b.txt
    LCD-show/boot/config-4-800x480.txt
    LCD-show/boot/config-7-800x480.txt
    LCD-show/boot/config-43.txt
    LCD-show/boot/config-7-1024x600.txt-90
    tar: LCD-show/boot/config-7-1024x600.txt-90: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-35b.txt-180
    LCD-show/boot/config-7-800x480.txt-90
    tar: LCD-show/boot/config-7-800x480.txt-90: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-5.txt
    LCD-show/boot/mark
    LCD-show/boot/config-35.txt-180
    tar: LCD-show/boot/config-35.txt-180: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-35.txt
    LCD-show/boot/config-32.txt-180
    tar: LCD-show/boot/config-32.txt-180: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-101-1024x600.txt-90
    tar: LCD-show/boot/config-101-1024x600.txt-90: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-4.txt-90
    tar: LCD-show/boot/config-4.txt-90: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-4-800x480.txt-180
    tar: LCD-show/boot/config-4-800x480.txt-180: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-7-800x480.txt-270
    tar: LCD-show/boot/config-7-800x480.txt-270: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-5.txt-270
    tar: LCD-show/boot/config-5.txt-270: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-101-1024x600.txt-270
    tar: LCD-show/boot/config-101-1024x600.txt-270: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-4.txt-270
    tar: LCD-show/boot/config-4.txt-270: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-4.txt-180
    tar: LCD-show/boot/config-4.txt-180: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-7-800x480.txt-180
    tar: LCD-show/boot/config-7-800x480.txt-180: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-43.txt-90
    tar: LCD-show/boot/config-43.txt-90: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-5.txt-180
    tar: LCD-show/boot/config-5.txt-180: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-35b.txt-90
    LCD-show/boot/config-35.txt-270
    tar: LCD-show/boot/config-35.txt-270: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-5.txt-90
    tar: LCD-show/boot/config-5.txt-90: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-4-800x480.txt-90
    tar: LCD-show/boot/config-4-800x480.txt-90: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-nomal.txt
    LCD-show/boot/config-32.txt
    LCD-show/boot/config-35.txt-90
    tar: LCD-show/boot/config-35.txt-90: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-32.txt-90
    tar: LCD-show/boot/config-32.txt-90: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-4-800x480.txt-270
    tar: LCD-show/boot/config-4-800x480.txt-270: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-101-1024x600.txt-180
    tar: LCD-show/boot/config-101-1024x600.txt-180: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-32.txt-270
    tar: LCD-show/boot/config-32.txt-270: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-43.txt-180
    tar: LCD-show/boot/config-43.txt-180: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-43.txt-270
    tar: LCD-show/boot/config-43.txt-270: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-4.txt
    LCD-show/boot/config-7-1024x600.txt
    LCD-show/boot/config-101-1024x600.txt
    LCD-show/boot/config-7-1024x600.txt-180
    tar: LCD-show/boot/config-7-1024x600.txt-180: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/boot/config-7-1024x600.txt-270
    tar: LCD-show/boot/config-7-1024x600.txt-270: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/dtc.sh
    LCD-show/LCD32-show
    tar: LCD-show/LCD32-show: Kann Datei-Eigentümer nicht zu uid 65534, gid 65534 ändern: Die Operation ist nicht erlaubt
    LCD-show/LCD28-show
    tar: LCD-show/LCD28-show: Kann Datei-Eigentümer nicht zu uid 1000, gid 1000 ändern: Die Operation ist nicht erlaubt
    LCD-show/LCD4-show
    LCD-show/waveshare35b-overlay.dtb
    LCD-show/usr/
    LCD-show/usr/share/
    LCD-show/usr/share/X11/
    LCD-show/usr/share/X11/xorg.conf.d/
    LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI
    LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf
    LCD-show/LCD-hdmi
    LCD-show/\r/
    tar: LCD-show/\r: Funktion mkdir fehlgeschlagen: Das Argument ist ungültig
    LCD-show/\r/99-calibration.conf-101-1024x600
    tar: LCD-show/\r: Funktion mkdir fehlgeschlagen: Das Argument ist ungültig
    tar: LCD-show/\r/99-calibration.conf-101-1024x600: Funktion open fehlgeschlagen: Datei oder Verzeichnis nicht gefunden
    LCD-show/LCD101-1024x600-show
    LCD-show/LCD35B-show
    LCD-show/LCD7-800x480-show
    LCD-show/LCD5-show
    tar: Beende mit Fehlerstatus aufgrund vorheriger Fehler

  • 10.1inch HDMI LCD - Problem bei Treiberinstallation? Schau mal ob du hier fündig wirst!

  • Hallo,

    mit sudo -i kommt leider das gleiche :(

    Das Display funktioniert, nur leider ist in diesem Paket auch die Kalibrierung für den touch. Ich habe bereits xinput-calibrator über apt-get getestet, der bringt jedoch nur die Meldung kein Touchdisplay gefunden - was mich wieder zurückführt zu dem Treiberbroblem.

    Grüße Thorsten

  • Ds war auch meine Idee, washalb ich vor der Hilfesuche hier dies bereits gemacht habe. Neue SD Karte rein und feuer - die Installation ist noch keine 2 Stunden alt und ausser der fstab, crontab und der config.txt wurde noch nichts daran geändert.

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!