Hallo,
seit zwei Tagen versuche ich, dass mein Raspberry Pi nach 10min den Bildschirm nicht mehr schwarz werden lässt. Ich vermute, dass es nicht nur der Bildschirmschoner ist, sondern auch die Energy Star Funktion des Raspberrys. Folgende Einstellungen wurden bisher vorgenommen:
Code
%Konsolenbefehl: xset -q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
XKB indicators:
00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 33
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 0 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 20/10 threshold: 10
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0x0 WhitePixel: 0xffff
Font Path:
/usr/share/fonts/X11/Type1,built-ins
DPMS (Energy Star):
Standby: 600 Suspend: 600 Off: 600
DPMS is Enabled
Monitor is On
%Konsolenbefehl: xset p
usage: xset [-display host:dpy] option ...
To turn bell off:
-b b off b 0
To set bell volume, pitch and duration:
b [vol [pitch [dur]]] b on
To disable bug compatibility mode:
-bc
To enable bug compatibility mode:
bc
To turn keyclick off:
-c c off c 0
To set keyclick volume:
c [0-100] c on
To control Energy Star (DPMS) features:
-dpms Energy Star features off
+dpms Energy Star features on
dpms [standby [suspend [off]]]
force standby
force suspend
force off
force on
(also implicitly enables DPMS features)
a timeout value of zero disables the mode
To set the font path:
fp= path[,path...]
To restore the default font path:
fp default
To have the server reread font databases:
fp rehash
To remove elements from font path:
-fp path[,path...] fp- path[,path...]
To prepend or append elements to font path:
+fp path[,path...] fp+ path[,path...]
To set LED states off or on:
-led [1-32] led off
led [1-32] led on
-led named 'name' led off
led named 'name' led on
To set mouse acceleration and threshold:
m [acc_mult[/acc_div] [thr]] m default
To set pixel colors:
p pixel_value color_name
To turn auto-repeat off or on:
-r [keycode] r off
r [keycode] r on
r rate [delay [rate]]
For screen-saver control:
s [timeout [cycle]] s default s on
s blank s noblank s off
s expose s noexpose
s activate s reset
For status information: q
%Konsolenbefehl: sudo nano /etc/kbd/config
#
# This files tells the 'kbd' package:
#
# - whether to load a specific font and boot (and maybe a screen-font map,
# but you should avoid that if possible).
# - whether to setup an Application-Charset Map other than the default CP437.
# - whether to do screen saver/DPMS settings
# - whether to change the keyboard rate/delay or the state of the
# keyboard indicators
# - whether to show a clock
#
# You can also specify per-VC settings by suffixing variable names as in
# the examples below. This only works on framebuffer devices.
#
# For consistency with the configuration file of console-tools the
# following variables and their _vcN versions are also supported:
# SCREEN_FONT, SCREEN_FONT_MAP and APP_CHARSET_MAP.
#
#
# Example:
#
#CONSOLE_FONT=iso01.f16
#CONSOLE_FONT_vc2=LatArCyrHeb-16
#
#CONSOLE_MAP=iso05
#CONSOLE_MAP_vc2=user
#
# Set the following - more euro-friendly default than kernel font.
#CONSOLE_FONT=latarcyrheb-sun16.psf
# Forget this one unless you _know_ it is necessary for your font:
#FONT_MAP=iso01
# **** screen saver/DPMS settings: all VCs ****
# These settings are commented by default to avoid the chance of damage to
# very old monitors that don't support DPMS signalling.
# screen blanking timeout. monitor remains on, but the screen is cleared to
# range: 0-60 min (0==never) kernels I've looked at default to 10 minutes.
# (see linux/drivers/char/console.c)
BLANK_TIME=60
# blanking method (VESA DPMS mode to use after BLANK_TIME, before powerdown):
# on: the default, no DPMS signalling. near instant powerup, no power saving
# vsync: DPMS Standby mode. nearly instant recovery, uses 110/120W (17" screen)
# hsync: DPMS Suspend mode. typically 3s recovery, uses 15/120W (17" screen)
# powerdown,off: DPMS Off mode, typ. 10s recovery, uses 5/120W (17" screen)
# Those values are for my 17" Mag, but some monitors do suspend the same as
# standby. xset dpms force {off|standby|suspend|on} is useful for this, if X
# supports DPMS on your video card. Set X's DPMS screensaver with xset dpms
# or use option power_saver in XF86Config
#
# DPMS set by default to on, because hsync can cause problems on certain
# hardware, such as Armada E500 laptops
BLANK_DPMS=off
# Powerdown time. The console will go to DPMS Off mode POWERDOWN_TIME
# minutes _after_ blanking. (POWERDOWN_TIME + BLANK_TIME after the last input)
POWERDOWN_TIME=0
# rate and delay can get only specific values, consult kbdrate(1) for help
#KEYBOARD_RATE="30"
#KEYBOARD_DELAY="250"
# Turn on numlock by default
LEDS=+num
# Display a clock in the right upper corner of the console by running vcstime
#DO_VCSTIME=yes
Alles anzeigen
Bisher half alles nichts. Der Bildschirm schaltet sich nach wie vor nach 10min aus. Beim Bildschrim wurde die Funktion automatisch abschalten deaktiviert.
Weiß jemand, welche Einstellung ich noch vornehmen muss, dass der Bildschrim nicht deaktiviert wird.
Vielen Dank im Voraus.