Hallo,
Ich hab dieses System: http://lightpack.tv/
Das ganze läuft über USB.
Ich hab für die Installation von Boblight nach diesem Tut gearbeitet:
ambi-tv - Ambilight für HDMI Quellen
bis auf den Schritt mit dem Kompilieren, das hab ich folgendermaßen gemacht:
Zitat./configure --without-portaudio --with-libusb --with-ffmpeg
make
Für die Installation des USB-Videograbbers nach diesem:
ambi-tv - Ambilight für HDMI Quellen (Schritt 1-3)
Zitatdmesg
zeigt:
[ 3.384925] usb 1-1.2: New USB device found, idVendor=1b71, idProduct=3002
[ 3.407073] usb 1-1.2: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 3.422537] usb 1-1.2: Product: usbtv007
[ 3.428677] usb 1-1.2: Manufacturer: fushicai
[ 3.449035] usb 1-1.2: SerialNumber: 300000000002
[ 3.542709] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[ 3.665262] usb 1-1.3: New USB device found, idVendor=1d50, idProduct=6022
[ 3.682553] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 3.705618] usb 1-1.3: Product: Lightpack
[ 3.711816] usb 1-1.3: Manufacturer: lightpack.googlecode.com
[ 3.720771] usb 1-1.3: SerialNumber: 9533031393935151B1D0
[ 3.741784] hid-generic 0003:1D50:6022.0001: hiddev0,hidraw0: USB HID v1.11 Device [lightpack.googlecode.com Lightpack] on usb-bcm2708_usb-1.3/input0
Alles anzeigen
USB-Videograbber wird erkannt "dev/video0" erscheint.
Lightpack erkannt (über boblight-constant FF0000 funktioniert es).
Zitatpi@raspberrypi ~ $ sudo boblight-v4l -c /dev/video0 -w 720x576 -o speed=70 -o gamma=2.0 -o value=0.7 -i 0.1
Gibt mir folgende Meldung aus:
Connecting to boblightd
Connection to boblightd opened
[video4linux2 @ 0xa13e60] [4]Capabilities: 85000001
[video4linux2 @ 0xa13e60] The V4L2 driver changed the pixel format from 0x33524742 to 0x56595559
[video4linux2 @ 0xa13e60] The V4L2 driver using the interlaced modeThe V4L2 driver changed the pixel format from 0x32315559 to 0x56595559
[video4linux2 @ 0xa13e60] The V4L2 driver using the interlaced modeThe V4L2 driver changed the pixel format from 0x50323234 to 0x56595559
[video4linux2 @ 0xa13e60] The V4L2 driver using the interlaced modeThe V4L2 driver using the interlaced modeThe V4L2 driver set input_id: 0, input: Composite
[video4linux2 @ 0xa13e60] Setting time per frame to 1/60
[video4linux2 @ 0xa13e60] ioctl set time per frame(1/60) failed
[video4linux2 @ 0xa13e60] ioctl(VIDIOC_DQBUF): Device or resource busy
[video4linux2 @ 0xa13e60] decoding for stream 0 failed
[video4linux2 @ 0xa13e60] Estimating duration from bitrate, this may be inaccurate
ERROR: Unable to find stream info
Alles anzeigen
Hab leider keine Ideen mehr, auf diesen Weg bin ich nach zwei Tagen/Nächten gekommen und nach unzählichen neuen aufsetzen der SD-Karte.
Hoffe mir kann jemand helfen.
LG w1191