Hi liebe Community!
Seit Wochen kämpfe ich damit den Scnner des Brother MFC 9180 auf meinem Raspy zum laufen zu kriegen. Da ich so gerne einen Scanner Server hätte. Der Drucker funktioniert mit Cups einwandfrei (zwar benütze ich den foomatic 9050 Treiber von Cups geht aber).
Doch den Scanner bekomme ich nicht zum laufen. Xsane kann keinen Scanner finden.
pi@quakerus ~ $ lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 005: ID 04f9:011e Brother Industries, Ltd MFC-9180
Bus 001 Device 004: ID 0480:a007 Toshiba America Info. Systems, Inc. External Disk USB 3.0
dpkg -l | grep Brother
ii brscan 0.2.4 i386 Brother CUPS Printer Definitions
ii brscan-skey 0.2.4-1 i386 Brother Linux scanner S-KEY tool
iU cupswrappermfc9180 1.0.2-1 i386 Brother MFC9180 CUPS wrapper driver
iHR mfc9180lpr 1.1.2-1 i386 Brother lpr Printer Definitions
ii printer-driver-ptouch 1.3-4 armhf printer driver Brother P-touch label printers
sane-find-scanner -q
found USB scanner (vendor=0x04f9, product=0x011e) at libusb:001:005
found USB scanner (vendor=0x0424, product=0xec00) at libusb:001:003
sudo scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Ich habe alle Anleitungen befolgt doch ich schaffe es einfach nicht villeicht könnt Ihr mir helfen ich würde mich sehr über Antworten freuen.
Namaste!
[edit: Der Scanner des Brothers lief einwandfrei unter Ubuntu 12.04 ich weiß nicht ob das etwas zur Sace tut.]