Codecs Funtionieren nicht mehr nach neu Installation!

  • Hallo!

    Ich glaub Ich mach da irgendwas Falsch.
    Habe meinen Raspberry neu genmacht. Also Karte Platt und OpenELEC neu aufgespielt.
    Jetzt habe Ich die Codecs wieder eingetragen nur werden die Codecs nicht erkannt.
    Woran liegt das? Habe Ich da was falsch gemacht?
    Ich muss doch einfach nur in der Config über Editor nach dem Mpeg die Zahlen eintragen,oder?

  • Codecs Funtionieren nicht mehr nach neu Installation!? Schau mal ob du hier fündig wirst!


  • Poste mal bitte deine /boot/config.txt


    (deine Keys kann eh kein anderer nutzen da nur mit deiner CPU-Serial funktioniert)

    ################################################################################
    # This file is part of OpenELEC - http://www.openelec.tv
    # Copyright (C) 2009-2012 Stephan Raue (stephan@openelec.tv)
    # Inspired and partly copied from:
    # http://youresuchageek.blogspot.fr/2012/09/howto-…penelec-on.html
    #
    # This Program is free software; you can redistribute it and/or modify
    # it under the terms of the GNU General Public License as published by
    # the Free Software Foundation; either version 2, or (at your option)
    # any later version.
    #
    # This Program is distributed in the hope that it will be useful,
    # but WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    # GNU General Public License for more details.
    #
    # You should have received a copy of the GNU General Public License
    # along with OpenELEC.tv; see the file COPYING. If not, write to
    # the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
    # http://www.gnu.org/copyleft/gpl.html
    ################################################################################
    # Bootloader configuration - config.txt
    ################################################################################

    ################################################################################
    # Memory (System/GPU configuration )
    ################################################################################

    # default GPU memory split (do not change if you do not know what you are doing)
    gpu_mem=128

    # SDRAM size based GPU memory split, uncomment and setup to override 'gpu_mem'
    gpu_mem_256=100
    gpu_mem_512=128

    ################################################################################
    # Overclocking settings
    # WARNING: Do not change/enable if you do not know what you are doing!
    # The System may become unstable or you can have data corruption or
    # you can loose your warranty if you set wrong settings
    #
    # please read: http://elinux.org/RPi_config.txt#Overclocking_configuration
    ################################################################################

    # Overclock mode settings.
    #
    # default recommended values are: arm_freq | core_freq | sdram_freq | over_voltage
    # no overclocking : 700 | 250 | 400 | 0
    # mode 'Modest' : 800 | 300 | 400 | 0
    # mode 'Medium' : 900 | 333 | 450 | 2
    # mode 'High' : 950 | 450 | 450 | 6
    # mode 'Turbo' : 1000 | 500 | 500 | 6

    # arm_freq=700
    # core_freq=250
    # sdram_freq=400
    # over_voltage=0

    # set to 'force_turbo=1' to disable dynamic overclocking (you can lose your warranty!)
    force_turbo=0

    # If you have any data corruption using Turbo Mode and overclocking
    # try with this setting uncommented
    # If this still fails, try to use Medium mode without "over_voltage=2"
    # If it ultimately keeps failing, forget about this until it gets fixed
    # Use a more conservative mode that will works fine in any cases:
    # initial_turbo=30

    ################################################################################
    # Overscan settings
    ################################################################################

    # Make display smaller to stop text spilling off the screen
    # see also http://www.raspberrypi.org/phpBB3/viewtopic.php?f=67&t=15700
    # overscan_scale=1
    # disable_overscan=1

    # Adapt overscan values to your needs
    # overscan_left=57
    # overscan_right=59
    # overscan_top=20
    # overscan_bottom=20

    ################################################################################
    # various settings see also: http://elinux.org/RPi_config.txt
    ################################################################################

    # Force HDMI even if unplugged or powered off
    # hdmi_force_hotplug=1

    ################################################################################
    # License keys to enable GPU hardware decoding for various codecs
    # to obtain keys visit the shop at http://www.raspberrypi.com
    ################################################################################

    # decode_MPG2=0xc4d3f48c decode_WVC1=0xa1331758 decode_DTS=0x00000000
    # decode_DDP=0x00000000

    ################################################################################
    # End of default configuration
    # all values below this line were inserted from config.txt.bk (your old config)
    # and can be merged with the above values
    ################################################################################

  • Da ist aber keine decode Zeile einkommentiert? Deinen decode Zeilen sind auskommentiert ( mit # am Zeilenanfang ) also wird diese Zeile ignoriert und somit auch nicht aktiviert


    PS: Das nächste mal bitte in Kode posten damit der Beitrag nicht so lang wird..

  • Danke!
    Jezt gehts. Gibt es irgendwo eine anleitung wie Ich Den Raspberry Videos vom PC lesen kann? bei mir kommt immer das er da ein Nutzername und ein Passwort möchte. Habe aber gar nix vergeben in Win7!

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!