Ambilight mit Hue sehr langsam

  • Hallo Community,

    ich habe ein großes Problem mit meinem Ambilight. Ich habe einen Raspberry Pi 3 mit LibreELEC und Hyperion am laufen, an dem ein Videograbber, ein HDMI 2 AV Konverter und ein HDMI Splitter angeschlossen sind. Nun habe ich schon alle verschiedenen (angeblich) funktionierenden Config Dateien eingebunden und angepasst, doch am Ende ist es so, dass die Hue Lampen dem Fernsehbild 4-5 Sekunden hinterher hängen. Ich besitze 3 Hue Bulbs und 1 Iris (Livingcolor).

    Nun frage ich mich wo der Fehler stecken könnte? Ich habe wie gesagt schon so gut wie jede Config Datei die ich finden konnte ausprobiert. Natürlich die wichtigen Daten angepasst.

    Wenn ich die Farbe über das HyperCon Tool sende, ändern sich diese fast auf den Punkt genau.

    Ich habe mir gedacht, dass dies evtl. am Videograbber liegen könnte? Ich habe folgenden Bestellt: https://www.amazon.de/gp/product/B0013B ... g=pow07-21 [Anzeige]

    Momentan hab ich diese Config eingebunden:

    Code
    [/size][/color][/align][align=justify][color=#444444][size=10]// Automatically generated configuration file for Hyperion ambilight daemon[/size][/color]// Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area) // Generated by: HyperCon (The Hyperion deamon configuration file builder)// Created with HyperCon V1.03.1 (11.06.2016){// DEVICE CONFIGURATION "device" :{"name" : "MyHyperionConfigHue","type" : "philipshue","output" : "192.168.***.**","transitiontime" : 1,"switchOffOnBlack" : true,"username" : "y2YZ6L0H3kLU6DzKshb42gFtC*****************","lightIds" : [1,2,3,4],"colorOrder" : "rgb"},// COLOR CALIBRATION CONFIG"color" :    {        "transform" :        [            {                "id"   : "default",                "leds" : "*",                "hsv" :                {                    "saturationGain" : 1.0000,                    "valueGain"      : 1.0000                },                "red" :                {                    "threshold"  : 0.0000,                    "gamma"      : 1.0000,                    "blacklevel" : 0.0000,                    "whitelevel" : 1.0000                },                "green" :                {                    "threshold"  : 0.0000,                    "gamma"      : 1.0000,                    "blacklevel" : 0.0000,                    "whitelevel" : 1.0000                },                "blue" :                {                    "threshold"  : 0.0000,                    "gamma"      : 1.0000,                    "blacklevel" : 0.0000,                    "whitelevel" : 1.0000                }            }        ],        "smoothing" :        {            "type"            : "none",            "time_ms"         : 200,            "updateFrequency" : 20.0000        }    },    ///  The configuration for each individual led. This contains the specification of the area    ///  averaged of an input image for each led to determine its color. Each item in the list    ///  contains the following fields:    ///  * index: The index of the led. This determines its location in the string of leds; zero    ///           being the first led.    ///  * hscan: The fractional part of the image along the horizontal used for the averaging    ///           (minimum and maximum inclusive)    ///  * vscan: The fractional part of the image along the vertical used for the averaging    ///           (minimum and maximum inclusive)    "leds" :    [            {            "index" : 0,            "hscan" : { "minimum" : 0.9000, "maximum" : 1.0000 },            "vscan" : { "minimum" : 0.3000, "maximum" : 0.5000 }            },            {            "index" : 1,            "hscan" : { "minimum" : 0.0000, "maximum" : 0.1000 },            "vscan" : { "minimum" : 0.3000, "maximum" : 0.5000 }            },            {            "index" : 2,            "hscan" : { "minimum" : 0.9000, "maximum" : 1.0000 },            "vscan" : { "minimum" : 0.3000, "maximum" : 0.5000 }            },            {            "index" : 3,            "hscan" : { "minimum" : 0.9000, "maximum" : 1.0000 },            "vscan" : { "minimum" : 0.3000, "maximum" : 0.5000 }            }    ],    /// The black border configuration, contains the following items:    ///  * enable    : true if the detector should be activated    ///  * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)    "blackborderdetector" :    {        "enable" : true,        "threshold" : 0.01    },    /// The configuration of the effect engine, contains the following items:    ///  * paths        : An array with absolute location(s) of directories with effects    ///  * bootsequence : The effect selected as 'boot sequence'    "effects" :    {        "paths" :        [            "/opt/hyperion/effects"        ]    },    "bootsequence" :    {        "effect" : "Rainbow swirl fast",        "duration_ms" : 3000    },    ///  The configuration for the frame-grabber, contains the following items:    ///   * width        : The width of the grabbed frames [pixels]    ///   * height       : The height of the grabbed frames [pixels]    ///   * frequency_Hz : The frequency of the frame grab [Hz]    "framegrabber" :    {        "width" : 64,        "height" : 64,        "frequency_Hz" : 5    },    /// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:    ///  * xbmcAddress       : The IP address of the XBMC-host    ///  * xbmcTcpPort       : The TCP-port of the XBMC-server    ///  * grabVideo         : Flag indicating that the frame-grabber is on(true) during video playback    ///  * grabPictures      : Flag indicating that the frame-grabber is on(true) during picture show    ///  * grabAudio         : Flag indicating that the frame-grabber is on(true) during audio playback    ///  * grabMenu          : Flag indicating that the frame-grabber is on(true) in the XBMC menu    ///  * grabScreensaver   : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver    ///  * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing    "xbmcVideoChecker" :    {        "xbmcAddress" : "127.0.0.1",        "xbmcTcpPort" : 9090,        "grabVideo" : true,        "grabPictures" : true,        "grabAudio" : false,        "grabMenu" : false,        "grabScreensaver" : false,        "enable3DDetection" : true    },      "grabber-v4l2" :   {    "device" : "/dev/video0",    "input" : 0,    "standard" : "PAL",    "width" : -1,    "height" : -1,    "frameDecimation" : 2,    "sizeDecimation" : 8,    "priority" : 800,    "mode" : "2D",    "cropLeft" : 0,    "cropRight" : 0,    "cropTop" : 0,    "cropBottom" : 0,    "redSignalThreshold" : 0.0,    "greenSignalThreshold" : 0.0,    "blueSignalThreshold" : 0.0  },    /// The configuration of the Json server which enables the json remote interface    ///  * port : Port at which the json server is started    "jsonServer" :    {        "port" : 19444    },    /// The configuration of the Proto server which enables the protobuffer remote interface    ///  * port : Port at which the protobuffer server is started    "protoServer" :    {        "port" : 19445    },    /// The configuration of the boblight server which enables the boblight remote interface    ///  * port : Port at which the boblight server is started//     "boblightServer" ://     {//         "port" : 19333//     },    "endOfJson" : "endOfJson"[color=#444444][size=10]}[/size][/color][/align][align=justify][color=#444444][size=10]

    [/size][/color]

    Ich würde mich sehr freuen wenn mir einer helfen könnte!!

    MfG
    TF-ART[/align]

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!