Hallo,
Ich besitze ein Set selbstlernende Funksteckdosen von Mumbi (Elro).
Beim Einlesen der Fernbedienung spuckt mir eine alte Version von pilight folgendes aus:
ZitatAlles anzeigenKlik Aan Klik Uit
ID: 121776
All/Single: Single
On/Off: ON
Unit: 1
Elro
ID: 11
House: 18
Wir krieg ich diese Steckdosen mit dem Pi geschaltet?
Ich habe dieses Tutorial benutzt: http://www.sweetpi.de/blog/119/funks…rry-pi-schalten
spyfly
Update:
Das aktuelle pilight spuckt folgendes aus:
ZitatAlles anzeigen{
"message": {
"id": 121776,
"unit": 1,
"state": "up"
},
"origin": "receiver",
"protocol": "arctech_screen",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 1
}
{
"message": {
"id": 121776,
"unit": 1,
"state": "on"
},
"origin": "receiver",
"protocol": "arctech_switch",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 1
}
{
"message": {
"id": 121776,
"unit": 1,
"state": "opened"
},
"origin": "receiver",
"protocol": "arctech_contact",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 1
}
{
"message": {
"systemcode": 18,
"unitcode": 11,
"state": "on"
},
"origin": "receiver",
"protocol": "pollin",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 1
}
{
"message": {
"systemcode": 18,
"unitcode": 11,
"state": "opened"
},
"origin": "receiver",
"protocol": "elro_800_contact",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 1
}
{
"message": {
"systemcode": 18,
"unitcode": 11,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_800_switch",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 1
}
{
"message": {
"unitcode": 769966,
"state": "opened"
},
"origin": "receiver",
"protocol": "ev1527",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 1
}
{
"message": {
"systemcode": 18,
"unitcode": 11,
"state": "on"
},
"origin": "receiver",
"protocol": "pollin",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 2
}
{
"message": {
"systemcode": 18,
"unitcode": 11,
"state": "opened"
},
"origin": "receiver",
"protocol": "elro_800_contact",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 2
}
{
"message": {
"systemcode": 18,
"unitcode": 11,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_800_switch",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 2
}
{
"message": {
"unitcode": 769966,
"state": "opened"
},
"origin": "receiver",
"protocol": "ev1527",
"uuid": "0000-b8-27-eb-9a7a94",
"repeats": 2
}
Was soll ich hiervon zum steuern verwenden?