Hallo Leute,
ich habe ein Problem bei der Partionierung meiner SD Karte.
Ich habe mich dank YouTube und Google durch viele kleine Problemchen mit meinem Raspberry kämpfen können, doch jetzt komme ich nicht weiter.
In meinem Raspberry steckt eine 16GB SD Speicherkarte. [Anzeige] Auf dieser läuft das aktuelle "wheezy" von der RaspberryPi.org Seite.
Ich habe mir dieses Tutorial als Hilfe besorgt.
Jetzt ist folgendes:
Ich gebe zuerst den Befehl
[code=php]dh -h[/php]
ein und bekomme folgendes angezeigt:
ZitatAlles anzeigenpi@raspberrypi ~ $ df -h
Dateisystem GröÃe Benutzt Verf. Verw% Eingehängt auf
rootfs 1,8G 1,7G 628K 100% /
/dev/root 1,8G 1,7G 628K 100% /
tmpfs 19M 256K 19M 2% /run
tmpfs 5,0M 0 5,0M 0% /run/lock
tmpfs 37M 4,0K 37M 1% /tmp
tmpfs 10M 0 10M 0% /dev
tmpfs 37M 0 37M 0% /run/shm
/dev/mmcblk0p1 56M 34M 23M 61% /boot
Um nun überhaupt erstmal, sowie im Video, einen Command-Befehl eingeben zu können, muss ich
[code=php]sudo fdisk /dev/mmcblk0p[/php]
eingeben. Das "-uc" muss ich weglassen, sonst bekomme ich eine erneute Auflistung dieser Parameter etc.
Folgendes wird mir angezeigt:
ZitatAlles anzeigenpi@raspberrypi ~ $ sudo fdisk /dev/mmcblk0
Command (m for help): p
Disk /dev/mmcblk0: 16.1 GB, 16130244608 bytes
4 heads, 16 sectors/track, 492256 cylinders, total 31504384 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000714e9Device Boot Start End Blocks Id System
/dev/mmcblk0p1 8192 122879 57344 c W95 FAT32 (LBA)
/dev/mmcblk0p2 122880 3788799 1832960 83 LinuxCommand (m for help):
Im Video sind hier 3 Devices aufgelistet. Mir fehlt jedoch der "Swap Device".
Was hat es mit dem Swap Device auf sich und warum besitze ich diesen nicht?
Mein Problem ist jetzt, dass ich nicht weiß wie ich weiter verfahren soll, da ich nicht weiß welche Parameter ich jetzt eintippen muss. Nutze ich die gleichen wie im Video, bekomme ich eine Fehlermeldung. Das sieht dann wie folgt aus:
ZitatAlles anzeigen
/dev/mmcblk0p1 8192 122879 57344 c W95 FAT32 (LBA)
/dev/mmcblk0p2 122880 3788799 1832960 83 LinuxCommand (m for help): d
Partition number (1-4): 2Command (m for help): d
Selected partition 1Command (m for help): 2
2: unknown command
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)Command (m for help):
Welche Eingaben muss ich machen, um meine SD Karte richtig zu partionieren?! Ich habe zwar schon ein wenig mit den Werten gespielt, jedoch kam ich nie wirklich weiter...
Kann mir jemand helfen?
Vielen Dank im voraus!