Problem USB-UART-Modul mit CP2102

  • [font="Courier, monospace"]Hallo,[/font]
    [font="Courier, monospace"]ich habe ein ELV USB-UART-Modul mit CP2102 Chip mit dem Raspberry 3 verbunden,[/font]
    [font="Courier, monospace"]dabei tritt folgendes Phänomen auf:[/font]
    [font="Courier, monospace"]Bei Eingabe von echo "test" > /dev/ttyUSB0 wird nur ein Zeichen ausgegeben Ausgabe t[/font]
    [font="Courier, monospace"]Bei Eingabe von sudo echo "test" > /dev/ttyUSB0 wird das ganze ausgegeben Ausgabe test[/font]

    [font="Courier, monospace"]root@raspberrypi:~# echo "test" > /dev/ttyUSB0 Ausgabe t[/font]
    [font="Courier, monospace"]root@raspberrypi:~# sudo echo "test" > /dev/ttyUSB0 Ausgabe test[/font]

    [font="Courier, monospace"]Weitere Parameter:[/font]
    [font="Courier, monospace"]Einstellungen in /dev/ttyUSB0: crwxrwxrwx 1 root dialout 188, 0 Apr 17 08:06 ttyUSB0[/font]
    [font="Courier, monospace"]dmesg | grep ttyUSB : [ 4.414069] usb 1-1.2: cp210x converter now attached to ttyUSB0[/font]

    [font="Courier, monospace"]Beim Anschluß eines USB-RS232 Adapterkabel ist die Ausgabe OK[/font]

    [font="Courier, monospace"]Kann mir jemand weiter helfen ?[/font]

    [font="Courier, monospace"]Gruß Werner[/font]

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!